深圳市亚义讯医疗科技有限公司致力于内窥镜光源、NIR-ICG近红外荧光成像光源、NBI光源,内窥镜光源,特殊窄带光光源,自体荧光成像光源,欢迎咨询洽谈;0755-86097590,13411885544
|
- 行业:其他照明器具
- 地址:深圳市坪山区龙田街道老坑社区锦绣中路18号齐心科技园综合楼401
- 电话:0755-86097590/13411885544
- 传真:0755-86097590
- 联系人:Mr. Luo
高亮白光LED模块CFT-90-W_120W高亮度白光LED模块
- 发布时间:2020-11-19
详细信息
CFT-90-W Product Datasheet
CFT-90-W
Specialty White LED
Features:
• Second generation monolithic 9 mm2 specialty white LED delivers increased peak lumens and drive current over CBT-90-W
• High current operation: up to 27 A DC
• Over 5500 lumens at maximum drive current
• Available in 5700K, 6500K and 7800K (typ) color temperatures
• Window-less package design improves optical coupling efficiency
• Low thermal resistance chip-on-board packaging technology: 0.45 °C/W typical junc-tion to back of core board.
General Considerations
Environmental Considerations:
As a leading provider of solid-state Lighting solutions, Luminus implements strict substance control policies to ensure all of
its products are environmentally friendly.As with all Luminus LEDs, the CFT-90-W series are compliant with the Restriction
of Hazardous Substances (RoHS) and REACH directives from the European Community.
Product Testing:
Every CFT-90-W LED is fully production tested to ensure it meets the high quality standards customers have come to expect from
Luminus products. Devices are tested and binned at a controlled 40ºC heat sink temperature and with a 22.5 A DC current,
corresponding to a nominal junction temperature of 90ºC. As a result, the devices lumens and chromaticity are binned “hot” and
their characteristics are close to insystem operating conditions. Current and temperature curves are provided in this document
allowing users to predict the LED performance and characteristics under their own driving and thermal conditions.
Reliability:
LuminusCFT90W LED series are required to pass a rigorous suite of environmental and mechanical stress tests, including
mechanical shock, vibration, temperature cycling and humidity. These tests ensure that the devices deliver high performance and
achieve reliable long term operation in demanding high power applications. Please contact Luminus for further information.
CFT-90-W Product Datasheet
Flux Binning Structure1,2
CFT-90-W LED series are production tested and binned at 22.5A DC, 40°C heat sink temperature (90°C nominal junction temperature).
Flux Bins3
Flux Bin |
Minumum Flux (lm) |
Maximum Flux (lm) |
UA |
3,680 |
3,955 |
UB |
3,955 |
4,230 |
VA |
4,230 |
4,545 |
VB |
4,545 |
4,860 |
WA |
4,860 |
5,225 |
WB |
5,225 |
5,590 |
XA |
5590 |
6011 |
XB |
6011 |
6430 |
CFT-90-W Product Datasheet
Chromaticity Bins
Refer to the next page for bin definitions
CFT-90-W Product Datasheet
The following tables describe the four chromaticity points that bound each chromaticity bin.1
Note 1: Based on production test conditions: 22.5 A DC, 90oC junction temperature.
Note 2:Chromaticity bin code A is defined but not offered in a bin kit.
CFT-90-W Product Datasheet
Ordering Information
Ordering Part Numbers
Note 1: Based on production test conditions : 22.5 A DC, 90oC junction temperature.
Note 2: The minimum flux of each bin kit is determined by the minimum flux bin. Higher flux bins are eligible to ship against shown bin kits and
part numbers.
CFT-90-W Product Datasheet
Product Characteristics and Ratings
Product Characteristics
Unless specified otherwise, all characteristics are based on nominal Tj = 90°C, If= 22.5 A DC.
Note 1: Please refer to mechanical drawing for dimensions and tolerancing.
Absolute Maximum Ratings
Note 1: Sustained operation at maximum current will result in shortened lifetime.
Note 2: Special design considerations must be observed for operation at low current density. Please contact Luminus for further information.
Note 3: Not designed for reverse current operation.
Note 4: Sustained operation at maximum operating Tj
will result is shortened lifetime and may cause premature product failure.
CFT-90-W Product Datasheet
CFT-90-W Product Datasheet
Optical and Thermal Characteristics
Important notice: please note that the CFT-90-W copper PCB is electrically active with a common cathode polarity
CFT-90-W Product Datasheet
Note 1: Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C .
Thermistor connector on Luminus coreboard: MOLEX P/N 53780-0270 (alternate: GCT P/N WTBO8-021S-F) .
Recommended female thermistor connector: MOLEX P/N 51146-0200 (alternate : GCT P/N WTBO6-021S or equivalent) .
For detailed drawing please refer to document DWG-002705.
Note 2: Some discoloration on the back of the coreboard is possible and is an expected consequence of the assembly process. The discoloration
does not affect the thermal properties or reliability of the product.
Note 3: Due to the nature of the manufacturing process used for this product, the phosphor element may exhibit localized cosmetic edge
irregularities of up to 100 um compared to nominal drawings.
Addendum
Ordering Part Numbers Affected
*CFT-90-WCS-X11-TB600 *CFT-90-WDS-X11-TB500 *CFT-90-WSS-X11-TB700
*CFT-90-WCS-X11-TB601 *CFT-90-WDS-X11-TB501 *CFT-90-WSS-X11-TB701
*CFT-90-WCS-X11-TB602 *CFT-90-WDS-X11-TB502 *CFT-90-WSS-X11-UA700
CFT-90-WCS-X11-UA600 CFT-90-WDS-X11-UA500 CFT-90-WSS-X11-UA701
CFT-90-WCS-X11-UA601 CFT-90-WDS-X11-UA501 CFT-90-WSS-X11-UB700
CFT-90-WCS-X11-UA602 CFT-90-WDS-X11-UA502 CFT-90-WSS-X11-UB701
CFT-90-WCS-X11-UB600 CFT-90-WDS-X11-UB500 CFT-90-WSS-X11-VA700
CFT-90-WCS-X11-UB601 CFT-90-WDS-X11-UB501 CFT-90-WSS-X11-VA701
CFT-90-WCS-X11-UB602 CFT-90-WDS-X11-UB502 CFT-90-WSS-X11-VB700
CFT-90-WCS-X11-VA600 CFT-90-WDS-X11-VA500 CFT-90-WSS-X11-VB701
CFT-90-WCS-X11-VA601 CFT-90-WDS-X11-VA501 CFT-90-WSS-X11-WA700
CFT-90-WCS-X11-VA602 CFT-90-WDS-X11-VA502 CFT-90-WSS-X11-WA701
CFT-90-WCS-X11-VB600 CFT-90-WDS-X11-VB500 CFT-90-WSS-X11-WB700
CFT-90-WCS-X11-VB601 CFT-90-WDS-X11-VB501 CFT-90-WSS-X11-WB701
CFT-90-WCS-X11-VB602 CFT-90-WDS-X11-VB502
CFT-90-WDS-X11-WA500
CFT-90-WDS-X11-WA501
CFT-90-WDS-X11-WA502
CFT-90-WDS-X11-WB500
CFT-90-WDS-X11-WB501
CFT-90-WDS-X11-WB502
* The asterisk indicates Ordering Part Numbers that are not supported and customers should consider
active part numbers for replacement
深圳微海源科技有限公司专业各类大功率LED照明模组及LED驱动模块,欢迎来电与我们洽谈!
各类白光LED,大功率RGB模块,紫外UV LED模块
分享到: |